Space Gray WPC Fluted Slat Wall Panel

Plank Size: 9.51 Feets
Plank Thickness : 0.12 In
Actual Product Height (in.): 0.94 In
Actual Product Width (in.): 6.69 In
Slats/Plank: WPC Fluted
Slat Size: 0.83 In
Item Weight:

1. Measure the Wall:
Begin by accurately measuring the area where the panels will be installed, noting any obstacles, such as windows or doors.
- Mark the areas where the panels will be placed.

2. Cut the Panels According to Your Measurements:
- Once you have the measurements, use a saw or any suitable cutting tool to cut the WPC panels to the required sizes.
- Ensure precise cuts for a seamless look once installed.
- Tip: Always measure twice to avoid cutting errors.

3. Apply Max Bond with Silicone Adhesive Glue:
- Use Max Bond adhesive and silicone for a strong, durable hold.
- Prepare the adhesive glue according to the manufacturer's instructions.

4. Apply Adhesive to the Panel:
- Turn the WPC panel over to its backside.
- Apply the Adhesive evenly on the back, especially around the edges and in the middle, ensuring it covers the surface adequately for a strong bond.

5. Place and Press the Panels onto the Wall:
- Carefully position the Panel on the Wall and press it firmly in place.
- Ensure proper alignment before the Adhesive starts setting. You can use a level to check alignment.
Tip: Apply even pressure across the entire Panel to form a strong bond with the Wall.

6. Wait 24 Hours for the Adhesive to Completely Dry:
- Allow the Adhesive to cure completely before proceeding. This ensures that the panels are securely attached to the Wall and will not shift during further installation.
7. Place the Keel on the Wall:
- After the Adhesive has dried, install the Keel (support structure) on the Wall.
- Ensure the base is flat and level, as this will serve as the structural foundation for the rest of the panels.
- Use nails or screws to secure the Keel to the Wall.

8. Fix the First Panel with a Nail Gun on the Keel:
- Place the first WPC panel on the Keel and fix it in place using a nail gun.
- Ensure the Panel is securely attached to the Keel with no gaps or misalignment.

9. Insert the Next Panel into the Slot and Fix on the Keel:
- Slide the next Panel into the slot of the first Panel, ensuring a snug fit with no visible gaps.
- Fix this Panel in place by nailing it to the Keel, repeating the process for the remaining panels.
Tip: For outdoors, allow space between panels for expansion due to temperature changes.

10. Continue with the Rest of the Panels:
- Keep inserting panels into the slots, fixing each one to the Keel until the entire Wall is covered.
- Ensure all panels are correctly aligned and securely fastened to the Keel.
Tip: Remove excess Adhesive immediately to prevent residue from hardening on the panel surfaces. Check Alignment Frequently to ensure all panels are straight and even
By following these steps, you'll achieve a professional-looking installation of WPC wall panels that is durable, long-lasting, and aesthetically pleasing.

We offer shipping across the USA. For standard-size panels, the handling time and delivery combined may take 5-7 business days. For oversized panels, the handling and delivery combined may take 7-9 business days. Please note that the timing provided is based on product availability in stock.
Wall Panels must be returned within 14 days of receipt. For more information, please refer to our Return Policy Page.